Every lab should have a few of these boards handy. The boards will allow you to easily rectify all your AC voltages. The Terminal Block TB connector is included and makes it easy to use. 

Basic operation of the voltage regulator board

A full wave bridge rectifier (diode bridge) is an a circuit utilizing of four diodes in a bridge configuration to convert alternating current (AC) into direct current (DC), also known as full-wave rectification.

The diodes bridge D1-D4, will convert input AC voltage to DC voltages (See below kit drawing). Additionally, the diode bridge ensures that the polarity of the bridge output remains the same, regardless of the input voltage polarity.

Model A                                Model B

High current (up to 3A)         Low current (up to 1A)

Schematic

Three main configurations can be achieve using the board:

• Convert alternating current (AC) into direct current (DC).

• Converting transformer with center Tap (TC) into positive and negative outputs.

• Ensuring the output polarity remains the same no matter how you connect the battery to the board.

Kit Includes

• 1N5006               Diode                   4pc. (model A only)

• 1N4007               Diode                   4pc. (model B only)

• 2P Terminal Block  Connector            1pc.

• 4P Terminal Block  Connector            1pc.

• PCB                                              1pc.

Option

Transformer with central tap (CT) configuration, see schematic below.

Low current diode bridge kit (Model B), outputs  up to 1A

Description and SKU#

Price

Picture

EID-K-BRIDG-ER-D1A-ASM Fully assembled

18.00

EID-K-BRIDG-ER-D1A-KIT kit

15.00

High current diode bridge kit (Model A), outputs  up to 3A

Description and SKU#

Price

Picture

EID-K-BRIDG-ER-D3A-ASM Fully assembled

24.00

High/Low current PCB

EID-K-BRIDG-ER-D3A-KIT kit

18.00

EID-K-BRIDG-ER-DXX-PCB PCB Only

9.99

  ^•